F-ONE Titan Mast Foot | Alu Mast to Titan Fuselage Connection Part

The F-ONE TITAN Mast Foot is the key connection part that makes F-ONE aluminium masts compatible with original TITAN fuselages and wings. It is CNC-machined from 6061 aluminium, fully anodised, and designed to give a precise, secure fit between your mast and foil system. F-ONE specifies that it installs into the bottom of the aluminium mast and is fastened with two M6x25mm tapered head screws.

If you are rebuilding an older F-ONE foil setup, replacing a worn part, or converting an aluminium mast to work with the original TITAN connection system, this is the part you need.

Who it’s for

The F-ONE TITAN Mast Foot is for riders using F-ONE aluminium foil masts with the original TITAN foil platform. It suits:

• Wing foilers replacing or refreshing older F-ONE foil hardware
• Surf foilers and SUP foilers running original TITAN fuselages and wings
• Riders who want a clean, precise mast-to-fuselage connection
• Existing F-ONE users maintaining pre-TITAN 2 foil setups

Key features

Original TITAN system compatibility
This part is designed to make F-ONE aluminium masts compatible with all original TITAN fuselages and wings.

CNC-machined 6061 aluminium
F-ONE uses superior-grade 6061 aluminium for accuracy, strength, and durability.

Fully anodised finish
The anodising helps improve corrosion resistance, which matters for saltwater use and long-term durability.

Precise, secure fit
Because this is a structural foil connection point, good machining accuracy matters. This part is built to sit cleanly in the mast and create a dependable interface with the rest of the foil.

Simple installation
F-ONE states the mast foot is inserted into the lower end of the aluminium mast and secured with two M6x25mm tapered head screws.

Real-world feel

This is not a glamorous upgrade, but it is an important one. On the water, a good mast connection is all about confidence. You want your foil to feel tight, aligned, and predictable, not vague or slightly loose under load.

The TITAN Mast Foot is the kind of part that keeps your foil setup feeling proper. If your current hardware is worn, damaged, or mismatched, replacing it can make your setup feel more solid and dependable again. For riders using older F-ONE aluminium foil systems, it is one of those small parts that makes a big difference to how trustworthy the whole setup feels.

Fit / setup notes

• Fits F-ONE aluminium masts using the original TITAN connection.
• Installs into the bottom end of the aluminium mast.
• Fastens with two M6x25mm tapered head screws.
• Important: F-ONE’s 2026 foil range uses the newer TITAN 2 connection, and F-ONE states the entire 2026 range is built around TITAN 2. Riders using aluminium masts can move to the new range by replacing their mast foot, but this original TITAN Mast Foot is for the earlier TITAN system, not the new TITAN 2 platform.

Why we stock it

At Northern Watersports, we stock the small foil parts that keep people riding, not just the headline gear. Hardware and connection pieces matter, especially with foil systems where fit and compatibility are everything.

The F-ONE TITAN Mast Foot is exactly the sort of spare part riders need when servicing an existing foil, replacing damaged components, or keeping an older F-ONE aluminium setup going properly. It is a simple part, but it has to be the right one.

Technical specs

• Brand: F-ONE
• Product: TITAN Mast Foot
• Reference: 77207-0200
• Material: 6061 aluminium
• Finish: Fully anodised
• Compatibility: F-ONE aluminium masts with original TITAN fuselages and wings
• Installation: Two M6x25mm tapered head screws

FAQs

What does the F-ONE TITAN Mast Foot do?
It connects an F-ONE aluminium mast to an original TITAN fuselage and wing setup.

Will this fit all current F-ONE foils?
No. F-ONE says its 2026 foil range uses the new TITAN 2 connection, so this original TITAN Mast Foot is mainly for earlier TITAN-based setups.

Is this for carbon masts?
No. F-ONE’s product page specifically describes this as the part that makes aluminium masts compatible with TITAN fuselages and wings.

What screws does it use?
F-ONE specifies two M6x25mm tapered head screws for installation.

Is it corrosion resistant?
It is made from 6061 aluminium and is fully anodised, which helps with durability and corrosion resistance in marine use.